Adam Kovacs - Talks

Talks

Conference talks

Effective Material Properties of Multi-Layered Porous Nanofilters. ICCE-17, Honolulu, HI, July 26-31, 2009 (co-author: A. Kovács).
Estimation of Load Capacity of Multi-Layered Porous Nanofilters. ICTAM 2008, Adelaide, Australia, August 24-29, 2008 (co-authors: A. Kovács, U. Mescheder).
Estimation of Material Properties of Multi-Layered Porous Nanofilters. XVth MCM Conference, Riga, Latvia, May 26-30, 2008 (co-authors: A. Kovács, U. Mescheder).
Effect of Silicon Reinforcement on Load Capacity of Porous Nanofilters. GAMM Conference 2008, Bremen, Germany, March 31 - April 4, 2008 (co-author: A. Kovács).
Kétrétegű porózus nanoszűrő membrán rugalmassági moduluszának meghatározása numerikus szimulációval (Determination of elastic modulus of a bi-layer porous nanosieve membrane by numerical simulation) - in Hungarian, X. MaMeK, Miskolc, Hungary, August 27-29, 2007 (co-author: Zs. Vízváry).
Effective Material Properties of Multi-Layered Porous Nanofilters. 17th International Workshop on Computational Mechanics of Materials, Paris, France, August 22-24, 2007 (co-authors: A. Kovács, U. Mescheder).
Estimates for the Load Capacity of Perforated and Porous Membranes. USNCCM9, San Francisco, CA, USA, July 23-26, 2007 (co-author A. Kovács).
Semi-Analytical Estimation of Load Capacity of Silicon Nitride Microsieve Membranes. 21st Canadian Congress of Applied Mechanics, Toronto, Canada, June 3-7, 2007.
Perforált mikroszűrő memránok terhelhetőségének becslése.
(Estimation of Load Capacity of Perforated Microfilter Membranes.) - in Hungarian XV. OGÉT 2007, Cluj-Napoca, Romania, April 26-29, 2007.
Numerical estimation of load capacity of thin microfilter-plates. Advanced Researches in Computational Mechanics and Virtual Engineering, Brasov, Romania, October 18-20, 2006.
Estimation of elasticity modulus and fracture strength of thin perforated SiN membranes with finite element simulation. 16th International Workshop on Computational Mechanics of Materials, Lublin, Poland, September 25-26, 2006 (co-authors: A. Kovács, U. Mescheder).
Large deflection analysis of perforated silicon nitride membranes. 6th European Solid Mechanics Conference, Budapest, Hungary, August 28 - September 1, 2006) (co-authors: Zs. Vízváry, A. Kovács, U. Mescheder).
Large deflection analysis of SiN membranes. Gépészet 2006. Fifth Conference on Mechanical Engineering, Budapest, Hungary, May, 25-26, 2006.
Shape optimization of a capacitive micro-switch. WCSMO6, Rio de Janeiro, Brazil, May 29 - June 3, 2005.
Estimation of switch-off time in a capacitive microswitch. GAMM Conference'05, Luxembourg, March, 28 - April, 1, 2005.
Numerical optimization of a capacitive micro-switch. Numerical Methods in Continuum Mechanics, Zilina, Slovakia, September 9-12, 2003.
Kapacitív mikrokapcsoló kapcsolási sebességének meghatározása analitikus és végeselem módszerrel.
(Determination of switch-off time of a capacitive microswitch by analytical and finite lement methods.) - in Hungarian, IX. MaMeK, Miskolc, Hungary, August 27-29, 2003.
Improved plate deflection calculation in bridge-type capacitive actuators. International Symposium on Sensors Science, Paris, France, June 16-20, 2003.
Analytical solution of a plate bending problem using symbolic algebra. GAMM Conference'03, Abano Terme, Italy, March, 24-28, 2003.
Creep and relaxation in metallic joints under simultaneous heat and mechanical load. GAMM Conference'03, Abano Terme, Italy, March, 24-28, 2003 (co-author: A. Nagy).
Comparison of some time-integration schemes in numerical creep analysis. Numerical Methods and Computational Mechanics, Miskolc, Hungary, July, 15-19, 2002.
Effect of anisotropy on the sensitivity of piezoresistive silicon pressure microsensors. WCCM V, Vienna, Austria, July 8-12, 2002.
Finite element creep analysis of gaskets under elevated temperature. GRACM 2002,
Patras, Greece, June 27-29, 2002 (co-author: A. Nagy).
Effects of anisotropy on the physical sensitivity of capacitive pressure microsensors. GRACM 2002, Patras, Greece, June 27-29, 2002.
Plate models for sensitivity analysis of capacitive pressure microsensors. Gépészet 2002. Third Conference on Mechanical Engineering, Budapest, Hungary, May, 30-31, 2002.
Prediction of creep behavior of nonferrous gaskets under elevated temperature. GAMM Conference'02, Augsburg, Germany, March, 25-29, 2002 (co-authors: A. Nagy, A. Pálfalvi).
Analytical calculation of sensitivity for capacitive pressure transducers. GAMM Conference'01, Zürich, Switzerland, February, 12-15, 2001 (co-author: Zs. Vízváry).
Stress analysis of buried pipelines subjected to seismic loading. Gépészet 2000. Second Conference on Mechanical Engineering, Budapest, Hungary, May, 25-26, 2000.
Special finite element issues in damage calculation of buried pipelines. ECCM'99, European Conference on Computational Mechanics. Munich, Germany, August 31 - September 3, 1999. (co-author: Zs. Szabó)
Stress analysis of buried pipelines of the emergency cooling system in NPP Paks. 2nd Joint Korean-Hungarian Symposion on Structural Reliability, Budapest, Hungary, January, 11-12, 1999.
Calculation of predicted lifetime of nuclear power plant vessels by deterministic and probabilistic methods. SPT-6 Conference, Vienna, Austria, July, 13-15, 1998.
Calculation of fatigue damage of nuclear power plant vessels by nonlinear models. Gépészet’98. First Conference on Mechanical Engineering, Budapest, Hungary, May, 28-29, 1998.
Chaotic behavior of some time-integration schemes in nonlinear dynamic systems.
ECCOMAS’96, Paris, France, September, 9-13, 1996.
Chaotic behavior of some time integration schemes.
Numerical Methods and Computational Mechanics in Science and Engineering,
Miskolc, Hungary, July, 15-19, 1996.
Bifurcation and chaos in time-integration schemes for spatially discretized field equations.
MAFELAP’96, Uxbridge, U.K., June, 25-28, 1996.
Implicit időintegrálási sémák összehasonlítása szerkezetdinamikai és hőrugalmas-képlékeny feladatokban.
(Comparison of implicit time-integration schemes in structure dynamic and thermoelasto-plastic problems.) – in Hungarian
VII. MAMEK, Miskolc, August, 29-31, 1995.
Thermal stresses in shrink fits due to instationary, inhomogeneous loading. (co-author: A. Nagy) ICIAM’95, Hamburg, Germany, July, 3-7, 1995.
An effective time integration scheme for transient thermomechanical problems using microcomputers. (co-author: M. Balla)
ICIAM’95, Hamburg, Germany, July, 3-7, 1995.
An effective time integration scheme for dynamic thermoplasticity problems using microcomputers. (co-author: M. Balla)
COMPLAS’95, Barcelona, Spain, April, 3-6, 1995.
Residual stresses in thermally loaded shrink fits.
XXX. Polish Solid Mechanics Conference, Zakopane, Poland, September, 4-9, 1994.
Thermoelastic-plastic deformations of shrink fits.
GAMM Conference ’93, Dresden, Germany, April, 12-16, 1993.
Modification of residual stress in a shrink fit due to thermal loading: Theoretical investigation. (co-author: H. Lippmann)
3d European Conference on Residual Stresses, Frankfurt/M, Germany, November, 4-6, 1992.
A feszültség állapot változása zsugorkötésben ciklikus hőterhelés hatására. (Modification of stress state in a shrink fit due to cyclic thermal loading) – in Hungarian
VI. MAMEK, Miskolc, Hungary, August, 28-30, 1991.
Elastic-plastic deformations in a shrink fit.
EUROMECH – 1^st European Solid Mechanics Conference, Munich, Germany, September, 9-13, 1991.
The effect of a temperature cycle on the stress distribution in a shrink fit. (co-author: H. Lippmann)
Plasticity’91, Grenoble, France, August, 12-16, 1991.
Lökésszerű teherrel terhelt szerkezetek vizsgálata végeselem módszerrel. (Analysis of structures loaded by transient loadings by the finite element method) – in Hungarian
V. MAMEK, Miskolc, Hungary, August, 24-26, 1987.

Other talks and lectures

Estimates for the load capacity of multi-layered porous nanofilters.
ITM Mechanik Seminar, Universität Karlsruhe (TH), Karlsruhe, February 14, 2008.
A végeselem módszer - alapok és alkalmazási lehetőségek
(Finite element method - basics and applications)- in Hungarian
eCon - V. ANSYS Conference, Budapest, April, 25, 2006.
Méretezés kifáradás ellen. (Design against fatigue.)- in Hungarian
Sapientia Transylvanian Hungarian University of Sciences, Targu Mures, March, 24, 2006.
Design on cyclic loading.
Technical University Brasov, March 22, 2006.
Kapacitív mikroérzékelők és beavatkozók szilárdsági vizsgálata - in Hungarian
(Stress analysis of capacitive microsensors and actuators)
Seminar on Applied Mechanics, Budapest University of Technology and Economics, November, 4, 2004.
Kapacitív mikroérzékelők szilárdsági számítása
(Stress calculation in capacitive microsensors)- in Hungarian
Hungarian Academy of Sciences, Committee of Theoretical and Applied Mechanics, Budapest, October, 6, 2004
Analytische Berechnung der Empfindlichkeit von kapazitiven Drucksensoren.
(Analytical calculation of sensitivity for capacitive pressure sensors.) - in German
Universität Karlsruhe, Karlsruhe, Februar, 5, 2001.
Numerische Bestimmung von Wärmespannungen in Schrumpfverbänden.
(Numerical determination of thermal stresses in shrink fits.) – in German
TU Wien, Vienna, October, 30, 1996.
Maradó feszültségek zsugorkötésben. (Residual stresses in shrink fits.) – in Hungarian
Hungarian Academy of Sciences, Committee of Theoretical and Applied Mechanics, Budapest, May, 22, 1996.
Elastic-plastic deformations in a shrink fit due to a temperature cycle.
1^st Bavarian-Tirolian Colloquium on Mechanics, Munich, July, 27, 1991.
Elastic-plastic deformations in a shrink fit due to a temperature cycle.
TUM-IIT German-Israeli Workshop, Munich, June, 24-28, 1991.
Investigation of elastic-plastic bodies under transient dynamic loading.
VI. Polish-Hungarian Seminar on Mechanics and Machine Design, Cracow, October, 20-22, 1987.
Megoszló erőrendszerrel terhelt gömbhéj vizsgálata implicit-explicit végeselem módszerrel.
(Analysis of a spherical shell under distributed loading by implicit-explicit finite element method) – in Hungarian
III. Scientific Forum of Young Lecturers and Researchers in TUB, Budapest, February, 11, 1985.

List of publications.

This page last updated: 02.17.2010