KSCON, NPT, DELR, KCTIP, NTHET, RRAT
Specifies a keypoint about which an area mesh will be skewed.
NPTKeypoint number at concentration. If NPT =
ALL, use all selected keypoints. If remaining fields are blank, remove concentration
from this keypoint (if unmeshed). If NPT = P,
graphical picking is enabled and all remaining command fields are ignored
(valid only in the GUI). A component name may also be substituted for NPT.
DELRRadius of first row of elements about keypoint.
KCTIPCrack tip singularity key:
0 | — | Do not skew midside nodes, if any, within the element. |
1 | — | Skew midside nodes of the first row of elements to the 1/4 point for crack tip singularity. |
NTHETNumber of elements in circumferential direction (defaults
to approximately one per 45° (or one per 30°, if KCTIP =
1)).
RRATRatio of 2nd row element size to DELR (defaults
to 0.75, or 0.5 if KCTIP = 1).
Defines a concentration keypoint about which an area mesh will be skewed. Useful for modeling stress concentrations and crack tips. During meshing, elements are initially generated circumferentially about, and radially away, from the keypoint. Lines attached to the keypoint are given appropriate divisions and spacing ratios. Only one concentration keypoint per unmeshed area is allowed. Use KSCON,STAT to list current status of concentration keypoints. The KSCON command does not support 3-D modeling.
This command is also valid for rezoning.