LSBW, NL, SEPO, KEEP
Subtracts the intersection of the working plane from lines (divides
lines).
NLLine (or lines, if picking is used) to be subtracted from.
If NL = ALL, use all selected lines. If NL =
P, graphical picking is enabled and all remaining command fields are ignored
(valid only in the GUI). A component name may also be input for NL.
SEPOBehavior of the created boundary.
(blank) | — | The resulting lines will share keypoint(s) where they touch. |
SEPO | — | The resulting lines will have separate, but coincident keypoint(s). |
KEEPSpecifies whether NL lines are
to be deleted:
Generates new lines by subtracting the intersection of the working plane
from the NL lines. The intersection will be a
keypoint(s). The working plane must not be in the same plane as the NL line(s).
If SEPO is blank, the NL line
is divided and the resulting lines will be connected, sharing a common keypoint
where they touch. If SEPO is set to SEPO, NL is
divided into two unconnected lines with separate keypoints. See the Modeling and Meshing Guide for
an illustration. See the BOPTN command for an explanation
of the options available to Boolean operations. Element attributes and solid
model boundary conditions assigned to the original entities will not be transferred
to the new entities generated. Areas that completely contain the input lines
will be updated if the lines are divided by this operation.