MFCONV, Lab, TOLER, --, MINREF
Sets convergence values for an ANSYS Multi-field solver analysis.
LabValid labels:
| Force labels: FX, FY, FZ |
| Displacement labels: UX, UY, UZ |
| Temperature label: TEMP |
| Heat flux label: HFLU (for surface load transfer) |
| Heat generation label: HGEN (for volume load transfer) |
If Lab = ALL, MFCONV applies the convergence value to all nine variables.
TOLERConvergence tolerance about program calculated reference value (the L2 norm of the new load in a multi-field analysis). Defaults to 0.01 (1%) for all labels. Must be less than 1.0.
--Unused field.
MINREFThe minimum value allowed for the program calculated
reference value. If negative, no minimum is enforced. Defaults to
1.0e-6 for all labels. Not available in the GUI. MINREF corresponds to ||ϕnew|| as defined in Set up Stagger
Solution in the Coupled-Field Analysis Guide.
MFCONV sets convergence values for variables at the ANSYS Multi-field solver interface.
This command is also valid in PREP7.
See Multi-field Commands in the Coupled-Field Analysis Guide for a list of all ANSYS Multi-field solver commands and their availability for MFS and MFX analyses.
Distributed ANSYS Restriction This command is not supported in Distributed ANSYS.