Table of Contents
- R - Defines the element real constants.
- RACE - Defines a "racetrack" current source.
-
RADOPT
- Specifies Radiosity Solver options.
- RAPPND - Appends results data from the database to the results file.
-
RATE
- Specifies whether the effect of creep strain rate will be used
in the solution of a load step.
- /RATIO - Distorts the object geometry.
- RBE3 - Distributes the force/moment applied at the master node to a set
of slave nodes, taking into account the geometry of the slave nodes as well
as weighting factors.
- RCON - Specifies "Real constants" as the subsequent status topic.
- RCYC - Calculates cyclic results for a mode-superposition harmonic
solution.
- RDEC - Defines the decimation parameters used by the radiosity solver
method.
- RDELE - Deletes real constant sets.
- READ - Reads coordinate and pressure data from a file.
- REAL - Sets the element real constant set attribute pointer.
- REALVAR - Forms a variable using only the real part of a complex variable.
- RECTNG - Creates a rectangular area anywhere on the working plane.
- REMESH - Specifies the starting and ending remeshing points, and
other options, for rezoning.
- *REMOVE - Suppresses rows or columns of a dense matrix or a vector.
- /RENAME - Renames a file.
- *REPEAT - Repeats the previous command.
- /REPLOT - Automatically reissues the last display command for convenience.
- RESCOMBINE - Reads results from local results files into the database
after a distributed memory parallel (Distributed ANSYS) solution.
- RESCONTROL - Controls file writing for multiframe restarts.
- RESET - Resets all POST1 or POST26 specifications to initial defaults.
- /RESET - Resets display specifications to their initial defaults.
- RESP - Generates a response spectrum.
- RESUME - Resumes the database from the database file.
- RESVEC - Calculates or includes residual
vectors or residual responses
- RESWRITE - Appends results data from the database to a results file.
- *RETURN - Returns input stream to a higher level.
- REXPORT - Exports displacements from an implicit run to ANSYS LS-DYNA.
- REZONE - Initiates the rezoning process, sets rezoning options,
and rebuilds the database.
- RFORCE - Specifies the total reaction force data to be stored.
- /RGB - Specifies the RGB color values for indices and contours.
- RIGID - Specifies known rigid body modes (if any) of the model.
- RIGRESP - Specifies the rigid response calculation.
- RIMPORT - Imports initial stresses from an explicit dynamics run into ANSYS.
- RLIST - Lists the real constant sets.
- RMALIST - Lists all defined master nodes for a ROM method.
- RMANL - Assigns model database, dimensionality, and operating direction
for the ROM method.
- RMASTER - Defines master nodes for the ROM method.
- RMCAP - Defines lumped capacitance pairs between conductors C1 and C2
for a ROM method.
- RMCLIST - Lists all lumped capacitance pairs defined.
- /RMDIR - Removes (deletes) a directory.
- RMFLVEC - Writes eigenvectors of fluid nodes to a file for use in damping
parameter extraction.
- RMLVSCALE - Defines element load vector scaling for a ROM use pass.
- RMMLIST - Lists all mode specifications for the ROM method.
- RMMRANGE - Defines and edits various modal parameters for the ROM method.
- RMMSELECT - Selects modes for the ROM method.
- RMNDISP - Extracts neutral plane displacements from a test load or element
load solution for the ROM method.
- RMNEVEC - Extracts neutral plane eigenvectors from a modal analysis for
the ROM method.
- RMODIF - Modifies real constant sets.
- RMORE - Adds real constants to a set.
- RMPORDER - Defines polynomial orders for ROM functions.
- RMRESUME - Resumes ROM data from a file.
- RMRGENERATE - Performs fitting procedure for all ROM functions to generate response
surfaces.
- RMROPTIONS - Defines options for ROM response surface fitting.
- RMRPLOT - Plots response surface of ROM function or its derivatives with
respect to the dominant mode(s).
- RMRSTATUS - Prints status of response surface for ROM function.
- RMSAVE - Saves ROM data to file.
- RMSMPLE - Runs finite element solutions and obtains sample points for the
ROM method.
- RMUSE - Activates ROM use pass for ROM elements.
- RMXPORT - Exports ROM model to external VHDL-AMS simulator.
-
ROCK
- Specifies a rocking response spectrum.
- ROSE - Specifies the Rosenblueth mode combination method.
- RPOLY - Creates a regular polygonal area centered about the working plane
origin.
- RPR4 - Creates a regular polygonal area or prism volume anywhere on the
working plane.
- RPRISM - Creates a regular prism volume centered about the working plane
origin.
- RPSD - Calculates response power spectral density (PSD).
- RSOPT - Creates or loads the radiosity mapping data file for SURF251 or SURF252 element
types.
- RSPLIT - Creates one or more results file(s) from the current results
file based on subsets of elements.
-
RSTMAC
- Calculates modal assurance criterion (MAC) and matches
nodal solutions from two results files or from one results file and
one universal format file.
- RSTOFF - Offsets node or element IDs in the FE geometry record.
- RSURF - Generates the radiosity surface elements (SURF251/SURF252) and stores
them in the database.
-
RSYMM
- Defines symmetry, rotation, or extrusion parameters for the
radiosity method.
- RSYS - Activates a coordinate system for printout or display
of element and nodal results.
- RTHICK - Defines variable thickness at nodes for shell elements.